c Mid-Term Ethics Report
This report will be due at the start of class on 2015 This report will be worth 100 points (See the Rubric for the grade breakdown)
1) Pick any of the following topics to write an ethics report
2) Use the NSPE Code of Ethics (and other engineering ethics guidelines) as a guide in your ethical discussions
3) In this report:
a) You will briefly introduce the topic and why you chose it;
b) You will discuss the advantages (pros) and disadvantages (cons) of the topic with regards to engineering ethics (see statement 2 above) [the pros and cons should be focused on possible design flaws & possible harm to ecological health (including water quality & quantity), human economy, human health, etc.];
c) If the topic is not already a specific example (such as the Fukushima “Ice Wall”), then provide (a) specific example(s) and/or (a) case study(ies);
d) Is there any engineering and/or scientific uncertainty? – if so, then what is it?; e) Are there any whistleblowers? – if so, then what is their position?;
f) What is your ethical view of the topic based on the research that you have performed? (use NSPE Code of Ethics in your response);
g) You should use the following resources for information (journal articles, newspaper articles, science magazine articles, academic/government Web sites, books, NSPE Code of Ethics, other scientific/engineering society code of ethics)
4) The report should be a minimum of 2 pages typed single-spaced with margins of 0.79” (top, bottom, left, right) in a 12 point Serif font (liberation serif, freeserif, freemono, linux libertine, Gentium, Doulos SIL, Charis SIL, Nimbus Mono L, Nimbus Roman No 9 L, Liberation Mono, Times, palatino, or Times New Roman)
Use this format:
Introduction The topic
Why you chose it Body
1 of 5
Advantages (Pros) and Disadvantages (Cons)
Specific examples and/or case studies (if not already a specific example) Uncertainty
Whistleblowers
Conclusion
Your ethical view on the topic
Bibliography
5) Use the references and bibliography format as appropriate in the report (see the last pages)
Topics:
Military Research & Design (R&D) Bribery
Corruption
Nepotism
Kickbacks
Whistleblowing
Protecting the public (Canon 1) versus protecting your client or employer (Canon 4)
Materials selection (economic cost versus protecting the public)
Precautionary Principle
Clean-up after the British Petroleum (BP) petroleum rig explosion and leakage in the Gulf of Mexico region
Fukushima “Ice Wall”
Hydraulic Fracturing (sinkholes, earthquakes, etc.)
The Addition of Fluoride Compounds to Drinking Water
The Addition of Disinfectants to both Drinking Water and Wastewater Centralized Water/Wastewater Treatment and Distribution Geoengineering
Drones
2 of 5
Weather modification
Petrochemical-based industrial agriculture (heavy equipment, petrochemical-based fertilizers & pesticides, etc.)
Genetic Engineering & Synthetic Biology
Software Patents
Artificial electricity (“Dirty” Electricity)
Alternating Current (AC) versus Direct Current (DC) Centralized Electricity Production and Distribution Electronic devices
Artificial Intelligence (AI)
Virtual Reality
Designing and using technology for mass surveillance and spying
Robot-Human interactions
Light Bulbs (Compact Fluorescent, Fluorescent, Incandescent, LED, etc.)
“Smart” Technology (Appliances, Cars, Energy/Electricity Grid, Houses, Glasses, Meters, Phones, etc.)
Renewable energy systems (hydropower, geothermal, solar, wind, etc.)
Energy Efficiency (including of buildings)
Energy Efficiency versus “Energy Effectiveness”
Nanotechnology
Design for obsolescence
Recycling/Downcycling (plastics, cardboard, paper, metals, glass, etc.)
Petrochemical-based automotive industry (review history of automobiles from Henry Ford to present- day looking at fuels, products used in the manufacturing of the vehicles, etc.)
Bridges, dams, highways, and other large scale civil engineering projects
Impervious surfaces (rooftops, roadways, parking lots, turf grass, planning/zoning, etc.)
3 of 5
Conventional Engineering Design versus “Green Engineering” or “Eco-Effective” Engineering Design
Web sites
Organization, Government Agency, Corporation.Title of Web page, <URL> (Accessed date).
Example:
National Society of Professional Engineers (NSPE). Code of Ethics (Revised July 2007), <http://www.nspe.org/resources/ethics/code-ethics> (Accessed 31 August 2015).
References – Sources used for any verbatim facts, information, or concepts contained in the assignment. References are numbered according to where the citation is made in the writer’s text.
1. 2.
3. 4.
5. 6.
7. 8.
9.
10. 11.
Wills, J., Advanced Chemistry, 4th ed., New York: Hayes, Grimes and Company, 1980, p. 36 (Book).
“Space Age Chemistry”, Springfield, Mass. Mirror, August 21, 1971, p.18, col. 3. (Newspaper articles).
Wills, op. cit., p. 44. (Same as reference 1, but different page).
Ibid., p. 46 (Same as reference 3, but different page. Ibid. is used because Will’s book has just a different page number)
Murray, R. L., ed., New Horizons in Chemistry, Eaton, Calif.: Easton Publishing Company, 1969, pp. 202-204. (Book edited by Murray.)
Wills, J., et al., Chemistry for Tomorrow, New York: Hayes, Grimes, and Company, 1968, p. 53. (Book written by many authors. Wills’)
Murray, loc. cit. (Same as reference 5.)
V. Table 2, p. 3. (The reader is referred to a table, which was presented and discussed on a previous page in this report).
Wills, Advanced Chemistry, p. 39. (Op. city. cannot be used because two works by this author have been cited.)
Ibid. (exactly the same as reference 9.)
Zirn, G.B. and L. N. Harris, “Potable Water from Desalination,” Water Resources Journal, February 16, 1971, pp. 99-103. (Magazine article by two authors.)
4 of 5
12. Allerton, J.D. Professor of Chemical Engineering, Eastern State University, in a personal interview, November 11, 1971.
13. Chicago Journal-Times, October 18, 1971, p. 40, col. 1. (Newspaper article without title.)
14. “Desalination.” National Encyclopedia, 7th ed., vol. IV, p. 61. (Encyclopedia article with author’s name not shown.)
Source: Modified version of the TSU College of Engineering Capstone Design/Technical Project Manual, page 19
Bibliography
Sources used for general information or concepts, which do not appear verbatim in the paper. The bibliography is presented in alphabetical order, by the first letter of the author’s or editor’s last name. Second line of bibliography citation must be indented five spaces. If there is no author or editor, then the first letter of the title is used. See examples listed below:
Chicago Journal-Times, October 18, 1971.
“Desalination,” National Encyclopedia, 7th ed., vol. IV. P. 61.
Murray, Roger L., ed. New Horizons in Chemistry. Eaton, Calif., Eaton Publishing Company, 1969.
“Space Age Chemistry,” Springfield, Mass., Mirror, August 21, 1971.
Wills, John, Advanced Chemistry, 4th ed., New York: Hayes, Grimes and Company,
1968.
Wills, John, et. al. Chemistry for Tomorrow. York: Hayes, Grimes and Company, 1968.
Zirn, G. B. and L. N. Harris. “Potable Water from Desalination.” Water Resources Journal, February 16, 1971.
Source: Modified version of the TSU College of Engineering Capstone Design/Technical Project Manual, page 20
5 of 5
For a custom paper on the above topic, place your order now!
What We Offer:
• On-time delivery guarantee
• PhD-level writers
• Automatic plagiarism check
• 100% money-back guarantee
• 100% Privacy and Confidentiality
• High Quality custom-written paper
You May Also Like This:
- Freshman Engineering Seminar Mid-Term Ethics Report
- Engineering Design
- Engineering Business Management Consultant
- Evaluation of a Business Code of Ethics
- : Applied Problem Solving in an Engineering Workplace – BSc Engineering Management
- COMPUTER AIDED ENGINEERING FINITE ELEMENTS ANALYSIS ASSIGNMENT
- Applied Problem Solving in an Engineering Workplace – BSc Engineering Management
- Faculty of Engineering and Computing
- Materials engineering.
- Highway Engineering
- Climate Engineering
- Control engineering
- Materials Engineering
- Oil production in Petroleum Engineering
- Cell Biology:
- solar energy
- The Beliefs of the Nurse Executive Impact on an Organization
- , Engineering and Construction
- Formal Feasibility Report
- Sandy the Mega-storm
- Describe key areas of the selected company’s code of conduct that are of significant importance to the business, and explain why.
- Ethics and social responsibilities
- legal ethics and proffesional practice
- The Leader Affects the Outcome of an Ethical Situation
- Component Interface for an Emergency Control Room
- Expressing amounts of energy in different energy
- Examining Your Community’s Source of Energy
- How Does This Relate to Me?
- Case Assignment (Ethic)
- Development Control (traffic engineering )